RDI Detailing - Ceramic Coating Richmond

RDI Detailing - Ceramic Coating Richmond

RDI Detailing - Ceramic Coating Richmond.
Application of ceramic coating.
Covering the car body with a protective compound is a time–consuming and lengthy procedure, which is only possible for those who are professionally engaged in detaling. There are two methods of applying ceramic protection: using an applicator or by spraying through an airbrush. The technology and stages of applying ceramic protection are as follows:
Thorough car washing. It is necessary to treat the car in such a way that there are no traces of reagents, bitumen, road plaque on its surface. To do this, first use special deep cleaning products, and then degreasing is carried out.
A great solution is - RDI Detailing Ceramic Coating Richmond Paint Protection Film Vancouver BC.
Removal of ingrained particles of reagents with special car scrapers and polishing clays of different levels of abrasiveness.
Polishing the car. The process is carried out carefully, in several stages. On the first, deep and medium scratches are removed, on the second, a small circular risk is removed, which remained after the first treatment. The third stage is finishing polishing with a fine–grained paste using an eccentric machine (this will prevent the appearance of glare and streaks on the coating).
Cleaning the car body from the remnants of polishing paste. This is done with isopropyl alcohol or other special cleaner and microfiber.
The car parts that are not covered with ceramics are masked with a protective film.
Using a sponge (applicator) or a special gun, the first layer of ceramic coating is applied. After application, the composition should dry, for this you should wait from 40 minutes to 1 hour (depending on the type of solution). During this time, moisture evaporates from the composition and the formation of a crystal lattice.
After the layer solidifies, the next one is applied. Usually this procedure takes place in 4-10 stages. The more layers are applied, the more reliable the protection of the car body will be.
Depending on the type of ceramics, the processing method may differ. The recommended temperature for the procedure is from 10 to 30⁰C. Infrared drying is used to accelerate solidification. Ceramics can be applied not only to the body, but also to other external parts of the car, except rubber.


dilana defna

6 Blog posts

Comments